Guangzhou OSUNSHINE Environmental Technology Co., Ltd 86-020-38246006  info@ozocenter.com
250G 300G 500G Large Ozone Generator System With Oxygen Source

250G 300G 500G Large Ozone Generator System With Oxygen Source

  • Điểm nổi bật

    longevity ozone generators

    ,

    high concentration ozone generator

  • Ozone output
    250 G/Hr
  • material
    ozone enamel tube
  • application
    water treatment,jeans color fading,air purifier,etc
  • Working Frequency
    800 Hz
  • Working Pressure of Discharge chamber
    0.05-0.1MPa
  • Cooling Water Flow way
    0.3-0.4 M3/h
  • Ozone Concentration
    250G/H
  • Place of Origin
    Guangdong China
  • Hàng hiệu
    Netech
  • Model Number
    CH-DGY250
  • Minimum Order Quantity
    1 set
  • Giá bán
    for futher discussion
  • Packaging Details
    Safe double carton package with foam inside for protection
  • Delivery Time
    40 days after payment confirmed
  • Payment Terms
    L/C, T/T
  • Supply Ability
    1000 sets per month

250G 300G 500G Large Ozone Generator System With Oxygen Source

250G 300G 500G Large Ozone Generator System With Oxygen Source

 

 

1.Applications

Ozone be used in chemical, petroleum, papermaking, textile, fine chemical and flavors and fragrances industry as the oxidant, catalyst.

 

Recently years, ozone is widely used in industrial sewage water treatment as it has the ability of high kill rate of bacteria, viruses and other microorganisms with high speed, and complete removing the organic compounds and other pollutants without creating secondary pollution, also can reduce the biological oxygen demand (BOD) and chemical oxygen demand (COD), remove nitrite, suspended solids and decolorization in water.

 

2Technical Description

1). Use enamel tubes for the core parts of ozone generator.

 

2). In order to ensure the safety and continuously operating of ozone discharge, each discharge cell is equipped with separated safety appliance. Single discharge unit failure does not affect the normal operation of other units.

 

3. Discharge chamber

1). Use stainless steel for the case, resistant to rust & corrosion, and can effectively prevent the cooling water fouling.

 

4. High frequency of power supply

1). Precise setting the Voltage and Working frequency. Output frequency resolution can be up to ± 0.1Ht. Voltage Precision ±1V.

2). Has a perfect overload, automatic current-limiting, overpressure, short circuit, lack of phase and power-off protection.

3). SPWM modulation technology. Power factor COSθ can be 0.9.

 

5. High voltage transformer

1). Using Mn-Zn ferrites for magnetic core. Small wastage of iron core / low Resistivity / low temperature coefficient / high rate of dynamic permeability under high frequency working condition.

2). Using special cables of high frequency & stranded conductor to reduce the skin effect of high-frequency current.

 

CH-DGY 250G Ozone System Technical Parameters:

 

Item CH-DGY250 Ozone Generator
Ozone Output (G/Hr) 250 G/Hr
Input Power Supply Voltage AC380V/50Hz/ three-phase four-wire
Ozone Power 2-2.5KW/h
Operating Voltage 3800V-4200V
Working Frequency 800Hz
Ozone Concentration 250G/H
Oxygen Feed Flow Rate 2-2.5M3/h
Air Source Dew Point -45℃
Working Pressure of Discharge chamber 0.05-0.1MPa
Air out Temperature ≤30℃
Inlet Cooling Water Temperature ≤20℃
Cooling Water Temperature Rise 4-6℃
Cooling Water Flow 0.3-0.4 M3/h
 

 

250G 300G 500G Large Ozone Generator System With Oxygen Source 0

 

Note: Pictures for reference only, subject to our existing products.

Picture are 1.0KG OZONE GENERATOR

250G 300G 500G Large Ozone Generator System With Oxygen Source 1

250G 300G 500G Large Ozone Generator System With Oxygen Source 2